Remove/Install Inertization System Line In Engine Compartment - AR86.10-P-0119MFA
WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2023 Mercedes-Benz CLA45 AMG, 2023 Mercedes-Benz CLA35 AMG, 2023 Mercedes-Benz CLA250, 2022 Mercedes-Benz CLA45 AMG, and 2022 Mercedes-Benz CLA35 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Model 118, 177, 247.7 with engine 139
with code 2U8 (Alternative refrigerant)
MODIFICATION NOTES
| 19.10.2023 | Bolt/nut for inerting system gas line to engine/body | Model 247 | BA86.10-P-1002-03K |
| Risk of injury . Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Notes on safety-relevant components | AH00.00-Z-0019-01A | ||
| Remove/install | |||
| 1 | Remove retaining clamp (2). | ||
| 2 | Remove screw (3). | *BA86.10-P-1002-03K | |
| 3 | Remove inerting system line (1). | ||
| Check | |||
| 4 | Check seal on line of inerting system (1) for damage. | If problems exist: ↓ Replace inerting system line (1). |
|
| 5 | Check inerting system line (1) for damage and blockage. | If problems exist: ↓ Replace inerting system line (1). |
|
| 6 | Install in the reverse order. |
INERTING SYSTEM
| Number | Designation | Model 118 | Model 177 | ||
|---|---|---|---|---|---|
| BA86.10-P-1002-03K | Bolt/nut for inerting system gas line to engine/body | M6 | Nm | 8 | 8 |
INERTING SYSTEM
| Number | Designation | Model 247 | ||
|---|---|---|---|---|
| BA86.10-P-1002-03K | Bolt/nut for inerting system gas line to engine/body | M6 | Nm | 6 |