Remove/Install Rear Fender Liner - AR88.10-P-1302MFA

Model 118, 177, 247 

Courtesy of MERCEDES-BENZ USA

Shown on model 177 

Courtesy of MERCEDES-BENZ USA

Shown on model 177 

	Remove/install
1	Raise vehicle.		AR00.60-P-1006A
2	Remove screw/bolts (2).
3	Remove expansion rivets (3).	Clip remover	Fig 1
4	Remove nuts (4).
5	Pull outer edge of the rear fender liner (1) inward out of the wheel arch lip and remove rear fender liner (1) downward.
6	Install in the reverse order.

Fig 1: Identifying Clip Remover (452 589 01 63 00)

Courtesy of MERCEDES-BENZ USA