Remove/Install Front Stabilizer Bar - AR32.35-P-2050GWX

Model 463.234 up to model year 2019 with code ZQ0 (G 500 4x4 ²  ) 

Model 463.255 up to model year 2019 with code MUK2 (USA or Canada vehicle model designation) with code ZQ0 (G 500 4x4 ²  ) 

Model 463.274 up to model year 2019 with code LQ0 (G650 Landaulet) 

Fig 1: Front Stabilizer Bar Components Location - Model 463.255 With Code MUK2 Up To Model Year 2019

Courtesy of MERCEDES-BENZ USA

	Risk of injury.  Moving parts can pinch, crush or, in extreme cases even sever extremities.	No parts of the body or limbs should be within the operating area of mechanical components when moving components.	AS00.00-Z-0009-01A
	Risk of death  caused by vehicle slipping or toppling off of the lifting platform.	Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.	AS00.00-Z-0010-01A
	Remove/install
1	Raise vehicle		AR00.60-P-1000G
2	Counterhold nuts (2) and remove bolts (3) at left and right	Nut, stabilizer bracket to frame	*BA32.35-P-1003-01A
3	Counterhold bolts (4) and release nuts (5) at I left and right	Nut, stabilizer bar to stabilizer bracket	*BA32.35-P-1002-01A
4	Fold stabilizer bracket downwards
5	Unscrew nuts (6) from mounting bar for trailing arm at left and right	Nut, stabilizer bar mounting bar to trailing arm	*BA32.35-P-1001-01A
6	Remove stabilizer bar (1) downwards	Aid of helper required.
7	Counterhold nuts (5), remove bolts (4) and remove stabilizer bracket	Only when replacing stabilizer bar. Nut, stabilizer bar to stabilizer bracket	*BA32.35-P-1002-01A
8	Unscrew nuts (7) and remove anti-twist lock for stabilizer rubber seal	Only when replacing stabilizer bar. Nut, bracket for elastomer bearing (anti-twist lock) to stabilizer bar	*BA32.35-P-1004-01A
9	Install in the reverse order