Remove/Install Front Spring - AR32.20-P-0200XG
Model 463 as of model year 2019
Fig 1: Front Coil Spring Components Location (Shown On Right Side Of Vehicle) - Model 463 As Of Model Year 2019
| Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension | Use only approved tensioning devices; additionally screen off hazardous area if necessary. Check special tools for damage and proper operation (visual inspection). Wear protective gloves. | AS00.00-Z-0001-01A | |
| Notes on self-locking nuts and bolts | AH00.00-N-0001-01A | ||
| Notes on repair work on suspension components | AH00.00-P-0100-01A | ||
| Remove | |||
| 1 | Remove front suspension strut (1). | AR32.25-P-1017XG | |
| Disassemble | |||
| 2 | Disassemble front suspension strut (1). | AR32.25-P-1018XG | |
| 3 | Remove spring (8). | ||
| Check | |||
| 4 | Check condition of upper spring retainer component parts (4), spring seat (5), spring (8) and lower spring retainer (9) and replace these respectively as required. | ||
| 5 | Check shock absorber (10) for damage and oil fouling, and replace if necessary. | AR32.25-P-0121XG | |
| Assemble | |||
| 6 | Assemble front suspension strut (1). | AR32.25-P-1018XG | |
| Install | |||
| 7 | Install suspension strut (1). | AR32.25-P-1017XG |