Detach/Attach Belt End Fitting - AR91.40-P-1030-02XG

Model 463

as of model year 2019

SEAT BELTS/EMERGENCY TENSIONING RETRACTORS

Number	Designation		Model 463 up to model year 2019	Model 463 as of model year 2019
BA91.40-P-1001-01C	Bolt on belt end fitting	Nm	35	35

Remove

Move front seat (1) to forward most and uppermost position.
Unclip trim (2) in direction of arrow and remove.

Courtesy of MERCEDES-BENZ USA
Disconnect the electrical connector (3).
Remove screw (4) and detach seat belt end fitting (5) with seat belt.

Courtesy of MERCEDES-BENZ USA

Install
Attach seat belt end fitting (5) with seat belt and tighten screw (4).
Ensure that seat belt is routed correctly.
Connect electrical connector (3).
Install trim (2).

Make sure that the guides are seated correctly in the mounts and that the catch hooks engage correctly.