Inerting System - BA86.10-P-1000-03J
Model 463
INERTIZATION SYSTEM
| Number | Designation | Model 463 up to model year 2019 | Model 463 as of model year 2019 | ||
|---|---|---|---|---|---|
| BA86.10-P-1001-03J | Nut, extinguishing agent tank to body | Nm | 4 | - | |
| BA86.10-P-1002-03J | Bolt, piping for inerting to engine/stationary heater | Nm | 8 | 8 | |
| BA86.10-P-1003-03J | Bolt, gas distributor to partition | Nm | 3 | - | |
| BA86.10-P-1004-03J | Screw, extinguishing agent tank holder to body | M6 | Nm | - | 8 |
| BA86.10-P-1005-03J | Screw, bracket of piping for inerting to air filter box | M4 | Nm | - | 1, 5 |