Replace Rear Muffler - AR49.10-P-4951GW
Engine 157, 279 in model 463
Engine 176 in model 463
up to model year 2019
| Risk of injury. Skin or eye injuries may result when handling hot or glowing objects. | Wear protective gloves, protective clothing and safety glasses, if necessary. | AS00.00-Z-0002-01A | |
| Remove/install | |||
| 1 | Lift/jack up vehicle | Engine 157, 279 in model 463 up to model year 2019 Engine 176 in model 463 up to model year 2019 | AR00.60-P-1000G |
| 2 | Secure rear muffler (4) against falling down | ||
| 3 | Remove bolt (1) | *BA49.10-P-1002-02F | |
| *BA49.10-P-1031-01A | |||
| 4 | Pull rear muffler (4) out of the rear elastomer bearings | ||
| 5 | Remove rear muffler (4) downwards | ||
| Check | |||
| 6 | Check elastomer bearing for damage; replace if necessary | ||
| 7 | Install in the reverse order | ||
| Check | |||
| 8 | Check installation position and unobstructed movement of exhaust system | ||
| Risk of accident from vehicle starting off by itself when engine running. Risk of injury (bruises and burns) resulting from working on the engine while it is being started or when it is running. | Secure vehicle to prevent it from starting off by itself. Wear closed and snug-fitting work clothes. Do not touch hot or rotating parts. | AS00.00-Z-0005-01A | |
| 9 | Carry out an engine test run and check exhaust system for leaktightness |
EXHAUST SYSTEM
| Number | Designation | Engine 176 in model 463 up to model year 2019 | Engine 176 in model 463 as of model year 2019 |
|
|---|---|---|---|---|
| BA49.10-P-1002-02F | Nut/bolt, catalytic converter to rear muffler | Nm | 20 | - |
EXHAUST SYSTEM
| Number | Designation | Engine 157, 279 in model 463 | |
| BA49.10-P-1031-01A | Bolt, catalytic converter to muffler | Nm | 25 |