LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> G63 AMG >> Repair and Diagnosis >> Electrical >> Motors, Switches, Relays >> Electrical System, Equipment & Instruments - 463 Chassis (1 Of 2) >> Maintenance >> Check Lamps In Instrument Cluster And Interior Illumination >> Check Lamps In Instrument Cluster And Interior Illumination - AP54.30-P-5453G

Check Lamps In Instrument Cluster And Interior Illumination - AP54.30-P-5453G

Model 463 

as of Model year 2019 

Shown on instrument cluster in Model 463.349 with code J25 (Widescreen cockpit), CLASSIC view 

Fig 1: Instrument Cluster Mechanical Gauges And Warning Indicator Lamps Components Location - Model 463 As Of M.Y. 2019 (Shown In Model 463.349 With Code J25, CLASSIC View)
G13658932Courtesy of MERCEDES-BENZ USA
  Preparatory activity     
1 Switch electronic ignition lock control unit to position "2" (circuit 15).    
INSPECT Check     
2 Check preglow system indicator lamp (1). IMPORTANT Model 463 with engine 656 as of Model year 2019
The preglow system indicator lamp (1) must light up and then go out.
 
    If problems occur,
↓
rectify the problems.
IMPORTANT After obtaining special order.
 
3 Check coolant temperature display (5) and coolant temperature warning lamp (4). IMPORTANT The display of the coolant temperature gauge (5) must show the corresponding coolant temperature and the coolant temperature warning lamp (4) must light up.  
    If problems occur,
↓
rectify the problems.
IMPORTANT After obtaining special order.
 
4 Check fuel display (8) and fuel reserve warning lamp (7). IMPORTANT The fuel display (8) must show the corresponding fuel level in the fuel tank, and the fuel reserve warning lamp (7) must light up.  
    If problems occur,
↓
rectify the problems.
IMPORTANT After obtaining special order.
 
5 Check multifunction display (6) for visible pixel faults, vertical stripes, failed segments or black points. If problems occur,
↓
rectify the problems.
IMPORTANT After obtaining special order.
 
6 Manually switch on the exterior lighting.    
7 Check instrument lighting. IMPORTANT The tachometer (2) and speedometer (9) must be illuminated.  
    If problems occur,
↓
rectify the problems.
IMPORTANT After obtaining special order.
 
8 Operate instrument lighting brightness control. IMPORTANT The instrument illumination must be brighter or darker to match.  
    If problems occur,
↓
rectify the problems.
IMPORTANT After obtaining special order.
 
9 Manually switch off exterior lighting.    
10 Switch on lamps in rear passenger compartment and check for proper operation. IMPORTANT Interior lights, Reading lamps, Mirror lamps, Glove compartment lamps.  
    If problems occur,
↓
rectify the problems.
IMPORTANT After obtaining special order.
 
11 Switch off lamps in rear passenger compartment.    
  Finishing activity     
12 Switch electronic ignition lock control unit to position "0".