Check Lamps In Instrument Cluster And Interior Illumination - AP54.30-P-5453D
Model 463
as of Model year 2013 up to Model year 2019
Shown on Model 463 with code XZ2 (Modification year 2012)
Fig 1: Instrument Cluster Mechanical Gauges And Warning Indicator Lamps Components Location - Model 463 As Of M.Y. 2013 Up To M.Y. 2019 (Shown With Code XZ2)
| Preparatory activity | |||
| 1 | Switch electronic ignition lock control unit to position "2" (circuit 15) | ||
| Check | |||
| 2 | Check coolant temperature gauge (7) and coolant temperature warning lamp (6) | If there is a problem ↓ Rectify problem subject to separate repair order. |
|
| 3 | Check fuel level indicator (9) and fuel reserve warning lamp (8) | ↓ Rectify problem subject to separate repair order. |
|
| 4 | Check multifunction display (1) for visible pixel faults, vertical stripes, failed segments or black points | If there is a problem ↓ Rectify problem subject to separate repair order. |
|
| 5 | Manually switch on the exterior lights | ||
| 6 | Check instrument illumination | ||
| If there is a problem ↓ Rectify problem subject to separate repair order. |
|||
| 7 | Actuate instrument illumination brightness control | ||
| If there is a problem ↓ Rectify problem subject to separate repair order. |
|||
| 8 | Manually switch off exterior lights | ||
| 9 | Switch on lamps in passenger compartment and check for proper operation | ||
| If there is a problem ↓ Rectify problem subject to separate repair order. |
|||
| 10 | Switch off lamps in passenger compartment | ||
| Finishing activity | |||
| 11 | Switch electronic ignition lock control unit to position "0" |