Remove/Install Rain And Light Sensor - AR82.00-P-1000GW

Model 463 

as of model year 2013 up to Model year 2019 

Fig 1: Rain And Light Sensor Components Location - Model 463 As Of Model Year 2013 Up To Model Year 2019

Courtesy of MERCEDES-BENZ USA

	Remove/Install
1	Unclip cover (2)
2	Unclip retaining clip (4)
3	Disconnect electrical plug connection (5)
4	Remove rain and light sensor (B38/2)	Do not touch the gel coating on the rain and light sensor (B38 / 2). Otherwise the function of the rain and light sensor (B38 / 2) will be impaired. Installation:  Clean the contact surface of the rain and light sensor (B38 / 2) on the windshield. Completely remove any gel residue from the windshield. Note the cleaning agent's exhaust air time. The rain and light sensor (B38 / 2) must be replaced if it has been removed. cleaner	*BR00.45-Z-1025-04A
5	Installation in reverse order
6	Read out and clear the fault memory with STAR DIAGNOSIS
	Connect STAR DIAGNOSIS, read out fault memory		AD00.00-P-2000-04A
7	Perform functional check

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1025-04A	Cleaner	A 005 989 19 71