Remove/Install Paneling On A-Pillar - AR68.30-P-4050XG

Model 463 

as of model year 2019 

Fig 1: A-Pillar Paneling Components Location - Model 463 As Of Model Year 2019

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Loosen edge guard (2) in the area of the A-pillar trim (1).
2	Unclip cover (3).	Replace cover (3) in the event of damage.
3	Remove screw (4).
4	Unclip A-pillar trim (1) from retaining clamps (5).
5	Pull A-pillar trim (1) toward the rear and up out of the instrument panel and remove.
6	Install in reverse order.