Remove/Install Paneling On A-Pillar - AR68.30-P-4050GWA
Model 463
as of model year 2017 up to model year 2019
with code ZU8 (National version for USA)
except code 979 (Special protection MB Guard)
Fig 1: A-Pillar Paneling Components Location - Model 463 As Of Model Year 2017 Up To Model Year 2019 With Code ZU8 Except Code 979
| Note on functional reliability of windowbag | AH91.60-P-0693-01A | ||
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | AH91.00-Z-0000-10A | ||
| Remove/install | |||
| 1 | Remove sealing frame of the front door (1) in the area of the A-pillar trim (4). | ||
| 2 | Unclip the cover (2). | ||
| 3 | Remove the screw (3). | ||
| 4 | Pry off the A-pillar trim (4). | Carefully pry off the A-pillar trim (4). Otherwise, the window airbag will be damaged. |
|
| 5 | Remove A-pillar trim (4) upward out of the instrument panel guide. | ||
| 6 | Install in reverse order. |