Remove/Install Glove Compartment - AR68.10-P-1400GW
Model 463
as of model year 2013 up to model year 2019
/facelift 2012
Fig 1: Glove Compartment Components Location - Model 463 As Of Model Year 2013 Up To Model Year 2019/Facelift 2012
| Remove/install | |||
| 1 | Open glove compartment cover (1) | ||
| 2 | Remove screw/bolts (2) | ||
| 3 | Unclip Media Interface plug housing from the glove compartment housing (3) | If installed | |
| 4 | Unclip AUX connection electrical connector (X39/45) from the glove compartment housing (3) | If installed | |
| 5 | Pull out glove compartment housing (3) | ||
| 6 | Disconnect electrical connector from glove compartment lamp (E13/1) | ||
| 7 | Install in the reverse order |