Adjust Reading Lamp In Inside Rearview Mirror To Steering Variant - AR68.40-P-0001-01XG

Model 463 

as of model year 2019 

1. Place the lens (1) at the cutouts (arrows A, B) on the corresponding mark "R" (a) or "L" (b) with retaining ring pliers.

   Carefully turn the lens (1).

   Otherwise, the lens (1) will be damaged.

   Set the left reading lamp (A67e1) and the right reading lamp (A67e2) according to the steering variant of the vehicle. The cutout (arrow A) of the lens (1) must be positioned on marking "R" (a) for right-hand drive vehicles and on marking "L" (b) for left-hand drive vehicles.

   Use lock ring pliers with tip diameter of max. 1.3 mm and an opening of min. 20 mm.

Courtesy of MERCEDES-BENZ USA