Remove/Install Headlamp Cover - AR88.00-P-2100GW

Model 463 

as of model year 2013 up to model year 2019 

Fig 1: Headlamp Cover Components Location - Model 463 As Of Model Year 2013 Up To Model Year 2019

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Switch off ignition
2	Loosen bolts (1)
3	Unclip headlamp surround (2) upward	Carefully press headlamp surround (2) upward out of the top two guides. Otherwise it can break.
4	Loosen hose clamp (3)
5	Detach splash water hose (4) of the headlamp cleaning system	Carefully detach splash water hose (4). Otherwise, there is a risk of breakage at the connectors of the spray nozzle (5).
6	Disconnect electrical connector (6)
7	Remove screws from the left headlamp of the daytime running lights (E1/3) and right headlamp of the daytime running lights (E2/3) and remove left headlamp of the daytime running lights (E13) and right headlamp of the daytime running lights (E2/3)	Otherwise, there is a risk of breakage at the connectors of the spray nozzle (5).
8	Install in the reverse order
9	Check headlamp cleaning system for proper function