Remove/Install Xenon Headlamp Control Unit - AR82.10-P-4632GW
Model 463
as of model year 2013 up to model year 2019
/Facelift 2012
Shown at right front
Fig 1: Xenon Headlamp Control Unit Components Location - Model 463 As Of Model Year 2013 Up To Model Year 2019 /Facelift 2012 (Shown At Right Front)
| Remove/install | |||
| Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | AS00.00-Z-0035-01A | |
| Risk of explosion/risk of fire caused by highly flammable materials in the vicinity of damaged xenon bulbs. Risk of injury caused by UV light, hot components on xenon headlamps and glass splinters produced by bursting xenon bulbs. Risk of poisoning caused by inhalation of mercury vapors and by swallowing of/skin contact with toxic salts and mercury compounds. | Do not touch parts conducting high voltage. Persons with active electronic implants (e.g. cardiac pacemakers) must never work on xenon headlamps. Switch off the entire lighting system. Wear insulated safety shoes, safety glasses and protective gloves. Remove highly inflammable materials from the danger zone. Ensure sufficient ventilation in the working area. | AS82.10-Z-0001-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| 1 | Buffer basic data of left xenon light control unit (E1n1) or right xenon light control unit (E2n1) in STAR DIAGNOSIS | When replacing the left xenon light control unit (E1n1) or right xenon light control unit (E2n1). | |
| AD00.00-P-2000-04A | |||
| 2 | Remove left front lamp unit (E1) or right front lamp unit (E2) | Model 463 (except 463.242) as of model year 2013 up to model year 2019 |
AR82.10-P-4730GW |
| 3 | Remove bolt (1) | ||
| 4 | Remove left xenon light control unit (E1n1) on left front lamp unit (E1) or right xenon light control unit (E2n1) on right front lamp unit (E2) | Fig 2 | |
| 5 | Install in the reverse order | ||
| 6 | Check adjustment of left low beam or right low beam, correct if necessary | When replacing the left xenon light control unit (E1n1) or right xenon light control unit (E2n1). |