Remove/Install Windshield Washer System Pump - AR82.35-P-6002XG
Model 463
as of model year 2019
| Risk of fire and explosion caused by ignition of window washing fluid or antifreeze and their vapors. Risk of poisoning caused by swallowing window washing fluid or antifreeze or inhaling their vapors. Risk of injury or physical irritations caused by contact of window washing fluid or antifreeze with eyes, mucous membranes or skin. | Wear protective clothing and tight-fitting safety glasses. No open flames, fire or ignition sources. Avoid contact with eyes, mucous membranes and skin. When working with window washing fluids or antifreeze, do not eat, drink, or smoke. Do not inhale vapors and ensure sufficient ventilation in the working area. Store window washing fluid and antifreeze leakfree in safely closed original containers and out of the reach of children. | AS82.35-Z-0001-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Lower washer fluid reservoir (1) until the windshield washer system pump (M5/1) is accessible. | AR82.35-P-6000XG | |
| 2 | Remove windshield washer system pump (M5/1) from washer fluid reservoir (1). | ||
| 3 | Disconnect electrical connector (2) from the windshield washer system pump (M5/1). | ||
| 4 | Release the washer fluid hoses (3) (arrows), detach from windshield washer system pump (M5/1) and remove windshield washer system pump (M5/1). | ||
| 5 | Remove seal (5) of windshield washer system pump (M5/1) from washer fluid reservoir (1). | If the seal (5) is damaged. ↓ Replace seal (5). |
|
| 6 | Install in reverse order. | ||
| 7 | Correct fluid level of windshield washer system. | ||
| AP82.35-P-8210GA |