Remove/Install Headlight Beam Adjustment Control Unit - AR82.10-P-4081GW
Model 463
as of model year 2013 up to model year 2019
/model refinement package
Fig 1: Headlight Beam Adjustment Control Unit Components Location - Model 463 As Of Model Year 2013 Up To Model Year 2019 /Model Refinement Package
| Remove/install | |||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| 1 | Connect STAR DIAGNOSIS and perform commissioning of headlamp range adjustment control unit (N71). | ||
| Connect STAR DIAGNOSIS and read out fault memory | AD00.00-P-2000-04A | ||
| 2 | Switch off ignition. | ||
| 3 | Remove covering under instrument panel. | Remove/install cover below instrument panel (right) | AR68.10-P-1520GW |
| 4 | Unscrew two nuts from below and detach headlamp range adjustment control unit (N71) from bracket. | ||
| 5 | Release and disconnect electrical connector from headlamp range adjustment control unit (N71). | ||
| 6 | Install in the reverse order |