Remove/Install Bracket For Cell Phone - AR82.70-P-8918GW
Model 463
as of model year 2013 up to model year 2019
Fig 1: Bracket For Cell Phone Components Location - Model 463 As Of Model Year 2013 Up To Model Year 2019
| Remove/install | |||
| 1 | Fold up armrest of center console | ||
| 2 | Remove screw/bolt (2) | ||
| 3 | Unclip cell phone holder (1) from center console top section (3) (arrow) | Carefully unclip cell phone holder (1). This will prevent damage to the cell phone holder (1) and the center console top section (3). |
|
| 4 | Remove center console top section (3) | AR68.20-P-2000GW | |
| 5 | Disconnect electrical connectors from cell phone holder (1) | ||
| 6 | Pull cell phone holder (1) out of center console top section (3) toward rear | ||
| 7 | Install in the reverse order | ||
| 8 | Read out and clear the fault memory using Star Diagnosis | ||
| AD00.00-P-2000-04A |