Windshield Wipers, Windshield Washer System And Headlamp Cleaning System - Function Check - AP82.30-P-8252GA
Model 463
as of model year 2019
Shown on model 463.260, spray pattern on windshield
Show on model 463.260
Shown on model 463.260, spray pattern on rear window
| Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism. | When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m). | AS82.30-Z-0001-01A | |
| Risk of fire and explosion caused by ignition of window washing fluid or antifreeze and their vapors. Risk of poisoning caused by swallowing window washing fluid or antifreeze or inhaling their vapors. Risk of injury or physical irritations caused by contact of window washing fluid or antifreeze with eyes, mucous membranes or skin. | Wear protective clothing and tight-fitting safety glasses. No open flames, fire or ignition sources. Avoid contact with eyes, mucous membranes and skin. When working with window washing fluids or antifreeze, do not eat, drink, or smoke. Do not inhale vapors and ensure sufficient ventilation in the working area. Store window washing fluid and antifreeze leakfree in safely closed original containers and out of the reach of children. | AS82.35-Z-0001-01A | |
| Preparatory activity | |||
| 1 | Close hood. | ||
| 2 | Close rear-end door, doors, sliding sunroof and the side windows. | ||
| 3 | Switch electronic ignition lock control unit to position "2" (circuit 15). | ||
| 4 | Switch on low beams. | ||
| Check/correct | |||
| 5 | Check spray nozzles of windshield washer system on windshield for proper operation and setting. | If the spray jet does not impact in the marked area on the windshield, ↓ Correct the adjustment if necessary. If the spray nozzle is clogged. ↓ Clean spray nozzle and/or blow out with compressed air from inside to outside or replace spray nozzle. |
Fig 1 |
| 6 | Check washer system spray nozzle on rear window for proper operation and setting. | If the spray jet does not impact in the marked area on the rear window, ↓ adjust spray nozzle. If the spray nozzle is clogged. ↓ Clean spray nozzle and/or blow out with compressed air from inside to outside or replace spray nozzle. |
Fig 1 |
| 7 | Check park position of left windshield wiper blade (1) and right windshield wiper blade (2) on the windshield. | If the ends of the wiper blades deviate from the park position, ↓ Check and adjust wiper arms. |
|
| 8 | Spray water using windshield washer system onto windshield. | ||
| 9 | Switch on the windshield wipers at highest setting. | ||
| 10 | Check setting of wiper arms on windshield. | The left windshield wiper blade (1) and right windshield wiper blade (2) must not collide with the A-pillar or cowl. Damage can otherwise occur. If problems are determined, ↓ rectify the problems. |
|
| 11 | Check park position for rear window wiper blade (3) on rear window. | The rear window wiper blade (3) must not make contact with the rear-end door in the parked position. Damage can otherwise occur. If rear window wiper blade (3) makes contact with rear-end door in parked position, ↓ Check and adjust wiper arm. |
|
| 12 | Spray water using windshield washer system onto rear window. | ||
| 13 | Switch on windshield wiper on rear window at its highest setting. | ||
| 14 | Check setting of wiper arm on rear window. | The rear window wiper blade (3) must not impact with the rear-end door. Damage can otherwise occur. If problems are determined, ↓ rectify the problems. |
|
| 15 | Check spray nozzles of headlamp cleaning system for proper operation. | If the spray jet does not impact in the area of the light source on the headlamp lenses, ↓ adjust spray nozzle. If the spray nozzle is clogged. Clean spray nozzle and/or blow out with compressed air from inside to outside or replace spray nozzle. |
Fig 1 |
| Finishing activity | |||
| 16 | Switch off low beams. | ||
| 17 | Switch electronic ignition lock control unit to position "0". | ||
| 18 | Check/correct fluid level of windshield washer system. | AP82.35-P-8210GA |