Remove/Install Rear Seat Backrest - AR91.12-P-1620GW

Model 463 (except 463.242) 

as of model year 2013 up to model year 2019 

Shown on right rear seat 

Courtesy of MERCEDES-BENZ USA

Courtesy of MERCEDES-BENZ USA

	Remove/install
	Remove head restraint in rear passenger compartment
	Move rear seat backrest forward
	Carefully pry off rear seat backrest release lever (2) at left or right
	Remove bolts from rear seat backrest cover (1) at left or right, and remove rear seat backrest cover (1) at left or right
	Disconnect electrical connector (8)
	Unhook rear seat backrest lock (4) at left or right	To do so, remove retaining washer (5) from bolt (6) and remove bolt (6).
	Remove bolts (7) from fitting of rear seat backrest at left or right	Bolt, backrest to backrest fitting	*BA91.12-P-1002-03J
	Remove rear seat backrest at left or right	A helper is required for the left rear seat backrest.
	Install in the reverse order