LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> G550 >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Seats, Bunks, Restraint Systems - 463 Chassis (2 Of 3) >> Testing & Repair >> Removing, Installing Windowbag >> Removing, Installing Windowbag - AR91.60-P-0693GW

Removing, Installing Windowbag - AR91.60-P-0693GW

Model 463 (except 463.202) 

as of model year 2013 up to model year 2019 

except code ZU8 (National version for USA) 

G13670589Courtesy of MERCEDES-BENZ USA
WARNING Risk of injury  during testing and repair operations related to pyrotechnical components Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts. AS91.00-Z-0008-01A
  Notes on self-locking nuts and bolts   AH00.00-N-0001-01A
  Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
  Notes on battery   AH54.10-P-0001-01A
  Information, assessment and legal requirements when working with, handling and storing pyrotechnical components   AH91.00-Z-0000-10A
REMOVINGINSTALLING Remove/install     
1 Switch off ignition and store transmitter key outside of transmitter range (at least 2 m).    
2 Remove ground line at battery. Model 463 (except 463.202/234/236/241/242/248)
as of model year 2013 up to model year 2019 except code ZU8 (National version for USA)
AR54.10-P-0003GW
3 Remove roof lining. Model 463 (except 463.202/242) as of model year 2013 up to model year 2019 except code ZU8 (National version for USA) AR68.30-P-4300GW
4 Release and disconnect electrical connector (2) from left window airbag squib or right window airbag squib.    
5 Bend back tabs (5) on A-pillar.    
6 Remove the screws (1). TORQUE SPECIFICATION Model 463 (except 463.202) as of 12/1/00 as of model year 2013 up to model year 2019 except code ZU8 (National version for USA) Screw/bolt, window airbag unit guide to roof frame *BA91.60-P-1006-01B 
    TORQUE SPECIFICATION Model 463 (except 463.202) as of 12/1/00 as of model year 2013 up to model year 2019 except code ZU8 (National version for USA) Screw/bolt for window airbag gas generator *BA91.60-P-1007-01B 
7 Detach window airbag unit together with duct (4) from roof frame.    
8 Install in reverse order.    
INSPECT Check     
9 Read out and clear fault memory with XENTRY Diagnosis. When replacing windowbag unit.  
REFER TO SELF-DIAGNOSTIC SYSTEMS   Model 463 (except 463.202)
as of model year 2013 up to model year 2019 except code ZU8 (National version for USA)
AD00.00-P-2000-04A
AIRBAG

Number Designation Model 463 as of 12/1/00 up to model year 2019
BA91.60-P-1006-01B Screw/bolt, window airbag unit guide to roof frame Nm 5
AIRBAG

Number Designation Model 463 as of 12/1/00 up to model year 2019
BA91.60-P-1007-01B Screw/bolt for window airbag gas generator Nm 5