Remove/Install Battery Sensor - AR54.10-P-0002XG

Model 463 

as of Model year 2019 

Fig 1: Battery Sensor And Ground Cable Components Location - Model 463 As Of Model Year 2019

Courtesy of MERCEDES-BENZ USA

	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Remove/install
1	Remove load compartment floor (1) and disconnect ground line (3) with battery sensor (B95) from negative pole of the on-board electrical system battery (G1).		AR54.10-P-0003XG
2	Release and disconnect electrical connector (4).
3	Unscrew nut (5) and remove ground line (3) with battery sensor (B95).	Model 463.260/261/276/277/349 as of Model year 2019 Nut, ground line for battery sensor to body	*BA00.19-P-1003-01L
4	Install in reverse order.

GROUND POINTS

Number	Designation				Model 463.260/261/276/277/349 as of Model year 2019
BA00.19-P-1003-01L	Nut, ground line for battery sensor to body	W10	M8	Nm	18