Remove/Install Windshield Washer Hose - AR82.35-P-6980XG
Model 463
as of model year 2019
| Risk of fire and explosion caused by ignition of window washing fluid or antifreeze and their vapors. Risk of poisoning caused by swallowing window washing fluid or antifreeze or inhaling their vapors. Risk of injury or physical irritations caused by contact of window washing fluid or antifreeze with eyes, mucous membranes or skin. | Wear protective clothing and tight-fitting safety glasses. No open flames, fire or ignition sources. Avoid contact with eyes, mucous membranes and skin. When working with window washing fluids or antifreeze, do not eat, drink, or smoke. Do not inhale vapors and ensure sufficient ventilation in the working area. Store window washing fluid and antifreeze leakfree in safely closed original containers and out of the reach of children. | AS82.35-Z-0001-01A | |
| Remove/install | |||
| 1 | Loosen washer fluid reservoir (5) until the windshield washer system pump (M5/1) is accessible. | AR82.35-P-6000XG | |
| 2 | Remove windshield washer system pump (M5/1) from washer fluid reservoir (5). | If the seal is damaged. ↓ Install new gasket. |
|
| 3 | Release clips (6) and disconnect washer fluid hose (1) from windshield washer system pump (M5/1). | ||
| 4 | Guide washer fluid hose (1) out of guide duct on washer fluid reservoir (5). | ||
| 5 | In the engine compartment, guide washer fluid hose (1) up to the grommet (4) upwards out of the wheel well. | ||
| 6 | On the hood, remove connections (2) of the washer fluid hose (1) from the spray nozzles (3). | ||
| 7 | Release washer fluid hose (1) from retaining clips and expose up to grommet (4). | ||
| 8 | Remove grommet (4) and remove washer fluid hose (1). | ||
| 9 | Install in reverse order. | ||
| 10 | Correct fluid level of windshield washer system. | ||
| AP82.35-P-8210GA |