LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> G550 >> Repair and Diagnosis >> Electrical >> Body Electrical >> Electrical System - Body - 463 Chassis (2 Of 3) >> Testing & Repair >> Remove/Install COMAND APS Hard Drive >> (Remove/Install COMAND APS Hard Drive - AR82.85-P-1001A)

(Remove/Install COMAND APS Hard Drive - AR82.85-P-1001A)

MODEL 164, 169, 171, 211, 219, 230, 245, 251 

as of model year 2009 

with CODE (512) COMAND APS with DVD changer 

with CODE (527) COMAND APS with single DVD drive (with navigation) 

except CODE (498) Japan version 

MODEL 203.7 

with CODE (527) COMAND APS with single DVD drive (with navigation) 

with CODE (044) New Telematics Generation NTG 2.5 

except CODE (498) Japan version 

MODEL 463 

with CODE (EU1) COMAND APS 

except CODE (ZJ1) Japan version 

up to model year 2013 

/model refinement package 2012 

G13669863Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
NOTES Information on preventing damage to electronic components due to electrostatic discharge   AH54.00-P-0001-01A
    IMPORTANT The following faults require an exchange of the hard disk (2):
  • System starts only as far as the star symbol and then shuts itself off again
  • Permanent fault messages such as:
    • Navigation unavailable
    • Drive unavailable
  • Music Register nonfunctional
  • Fault code 94D9:
    • Hard disk has malfunction
 
1 Perform initial startup of hard disk (2) at COMAND operating, display and controller unit (A40/3) with STAR DIAGNOSIS When replacing hard disk (2). AD00.00-P-2000-04A
2 Remove the COMAND operating, display and controller unit (A40/3) Model 164 AR82.60-P-7502GZ
    Model 169, 245 AR82.85-P-1000AK
    Model 171 AR82.85-P-1000V
    Model 203.7 AR82.85-P-7472PA
    Model 211 AR82.85-P-1000T
    Model 219 AR82.60-P-7502TY
    Model 230 AR82.85-P-7472RA
    Model 251 AR82.60-P-7502RT
    MODEL 463 AR82.85-P-7472GY
3 Set down COMAND operating, display and controller unit (A40/3) on an electrostatic discharge (ESD) workstation NOTES Otherwise damage to the electronics of the COMAND operating, display and controller unit (A40/3) or the hard disk (2) may occur.
ESD protection
 
4 Remove screws/bolts (1)    
5 Remove hard disk (2) upward (arrow) NOTES Avoid contact of the conductor tracks on the circuit board, otherwise damage to the electronics of the hard disk (2) or the COMAND operating, display and controller unit (A40/3) may occur.  
6 Install in the reverse order    
7 Update map data for navigation system Model 164, 169, 171, 219, 230, 245, 251 up to
model year 2011
Model 203.7, 211 * Map update
Model 164, 169, 171, 219, 230, 245, 251 as of
model year 2011
MODEL 463
AP82.85-P-8250A
8 Perform function test