Install CROSSMEMBER Under Engine - Ar62.30-P-1310-03XG

Model 463 

as of model year 2019 

Courtesy of MERCEDES-BENZ USA

Shown on left side of vehicle 

1. Install crossmember under the engine (1), fit with straighteners, and fix in place.
2. Crossmember under the engine (1) on the left and right side of the vehicles (areas A₁ , A₂ , A₃ , A₄ ).

   Observe welding sequence (areas A1 to A4).

   Observe welding direction (direction of the arrow).

   Inert gas weld in intervals and allow welding area to cool down in between. Reduces heat distortion.