Remove/Install Inner Paneling On Rear Door Window Frame - AR72.12-P-1012XG

Model 463 

as of model year 2019 

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Remove door lining at rear door.		AR72.12-P-1010XG
2	Unclip expansion rivet (1).	Dismantling tool	Fig 1
3	At the points marked in the picture (arrows), unclip catch hooks (2.1) of trim (2) from retaining clamps (3).	The catch hooks (2.1) must noticeably engage in the retaining clamps (3). Long wedge	Fig 2
	Check
4	Check the trim (2) and retaining clamps (3) for damage.	If the trim (2) or retaining clamps (3) are damaged, ↓ Replace respective component parts.
5	Install in reverse order.

Fig 1: Identifying Dismantling Tool (000 589 95 63 00)

Courtesy of MERCEDES-BENZ USA

Fig 2: Identifying Long Wedge (115 589 03 59 00)

Courtesy of MERCEDES-BENZ USA