(Retrofit Sensor Cable - AN54.65-P-0010-02A)

MODEL 463 up to production date 09/01/96 

1. Connect sensor cable to left outer sensor (A43b10).

   Courtesy of MERCEDES-BENZ USA

2. Attach sensor cable to bumper with clip-type fastener (arrow).
3. Connect sensor cable to left inner sensor (A43b9).
4. Route sensor cable to right outer sensor and right inner sensor, connect and attach.

   Courtesy of MERCEDES-BENZ USA

5. Mark cable opening in rear pillar and drill.

   a = 150 mm

   b = Ø 25 mm

   Ensure clearance at the rear.

   Courtesy of MERCEDES-BENZ USA

6. Insert sensor cable into rear pillar.

   Seal cable opening with plug.

   Courtesy of MERCEDES-BENZ USA

7. Run sensor cable to rear lamp wiring harness up into rear pillar.

   Courtesy of MERCEDES-BENZ USA