Remove/Install Backup Camera - AR54.65-P-0030GW

Model 463 (except 463.202/236/242) 

as of Model year 2013 up to Model year 2019 

with code FR8 (Rear view camera)/Facelift 2012 

Courtesy of MERCEDES-BENZ USA

Fig 1: Backup Camera Components Location - Model 463 (Except 463.202/236/242) As Of M.Y. 2013 Up To M.Y. 2019 With Code FR8 /Facelift 2012

Courtesy of MERCEDES-BENZ USA

	Remove/install
1	Switch off ignition
2	Detach upper door trim center piece (1) from rear-end door	Mounting wedge	Fig 2
3	Remove screw/bolts (2)
4	Detach reversing camera (B84/3)
5	Detach electrical connection from backup camera (B84/3x1)	To do so, carefully pull connection line out of rear-end door until the electrical connector for the reversing camera (B84/3x1) is accessible.
6	Install in the reverse order

Fig 2: Identifying Mounting Wedge (110 589 03 59 00)

Courtesy of MERCEDES-BENZ USA