LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2021 >> G550 >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Electrical System, Equipment & Instruments - 463 Chassis (1 Of 2) >> Testing & Repair >> Programming Of Control Units >> Programming Of Control Units - AR54.21-P-0014Z

Programming Of Control Units - AR54.21-P-0014Z

Model 117, 118, 129.058/063/067/076, 156, 163, 164, 167, 168, 169, 170, 171.4, 176, 177, 199, 203, 204, 205, 206, 207, 208, 209, 210, 211, 212, 213, 215, 216, 217, 218, 219, 220, 221, 222, 223, 230, 231, 240, 242, 243, 245 (Except 245.286), 246, 247, 251, 253 

Programming with Flash Support File 

Model 463 

from Model Year 2019 

Model 463 

up to Model Year 2013 

Programming with Flash Support File 

  Notes on programming control units   AH54.21-P-0001-03Z 
  Programming with Flash Support File (support from the User Help Desk)     
1 Connect the diagnostic system, start XENTRY, and select the vehicle Model.    
REFER TO SELF DIAGNOSTIC SYSTEMS   Model 167 programming with Flash Support File AD00.00-P-2000-06ME
REFER TO SELF DIAGNOSTIC SYSTEMS   Model 117, 129.058/063/067/076, 156, 163, 164, 168, 169, 170, 171.4, 176, 199, 203, 204, 207, 208, 209, 210, 211, 212, 215, 216, 218, 219, 220, 221, 230, 231, 240, 242, 245 (Except 245.286), 246, 251 Programming with Flash Support File AD00.00-P-2000-04A
REFER TO SELF DIAGNOSTIC SYSTEMS   Model 205, 213, 217, 222, 253 AD00.00-P-2000-04B
    Programming with Flash Support File Model 463
from Model Year 2019		  
REFER TO SELF DIAGNOSTIC SYSTEMS   Model 206, 223 Programming with Flash Support File AD00.00-P-2000-06FR
REFER TO SELF DIAGNOSTIC SYSTEMS   Model 118, 177, 243, 247 Programming with Flash Support File AD00.00-P-2000-06MFA
    NOTES Ensure that there is sufficient voltage supply to the vehicle electrical system during the entire work process.
Otherwise, if there is an undervoltage, damage to the control units can occur.		  
2 Select the control unit.    
3 Select the menu item "Control unit adjustments".    
4 Select the menu item "Support from User Help Desk".    
5 Select the menu item "Request control unit software".    
6 Save requested data on an external data storage device.    
7 Submit data request to the User Help Desk. IMPORTANT The control unit software is determined by the user help desk. A response file (Flash Support File) is created and transmitted accordingly.  
8 Unzip the response file (Flash Support File) and burn the data to a CD or save it to a USB removable storage device.    
9 Mark the CD or the USB removable storage device accordingly.    
10 Insert CD or the USB storage device. IMPORTANT To put control units in write mode, an unlocking code (key) is required for the respective control unit. If the regular processes are used, this is automatically requested from the central systems. In the offline fallback process, the user is requested by XENTRY to request the activation code by telephone from the Star Diagnosis User Help Desk. A detailed process description is stored in the INFO information system.  
11 Importing data.    
12 Eliminate the errors with the help of the current CD-DVD. In the event of a communication error between XENTRY and the control unit.
If the cause of the error cannot be eliminated,
↓
inform the Star Diagnosis User Help Desk.		  
13 Carry out documentation in Vehicle Documentation (VeDoc).    
14 Carry out SCN coding of the control units. If specified by XENTRY.  
      AR54.21-P-0015X 
15 Perform teach-in process. If specified by XENTRY.  
16 Read out and erase the fault memory.    
17 Disconnect the diagnostic system    
scientia non olet · About LEMON Manuals