Check Warning And Function Indicator Lamps In Instrument Cluster - AP54.30-P-5451GB

Model 463 

up to Model year 2019 

Fig 1: Instrument Cluster Warning And Function Indicator Lamps Components Location - Model 463 Up To Model Year 2019

Courtesy of MERCEDES-BENZ USA

	Preparatory activity
1	Switch electronic ignition lock control unit to position "2" (circuit 15)	Close the engine hood, the liftgate and all doors.
2	Operate parking brake
3	Switch on standing lights
	Check
4	Check warning lamps (7, 9, 10, 11, 13, 15, 17, 19, 20) and indicator lamps (6, 8, 12, 14, 16, 18) for proper operation	If present. If complaint present ↓ Rectify problem subject to separate repair order.
5	Manually switch on low beams	If present. The low beams indicator lamp (4) must light up and a lamp failure message must not be displayed in the multifunction display (21). If complaint present ↓ Rectify problem subject to separate repair order.
6	Switch on high beam	The high beams indicator lamp (3) must light up and a lamp failure message must not be displayed in the multifunction display (21). If complaint present ↓ Rectify problem subject to separate repair order.
7	Switch on rear fog lamp	If present. The rear fog light indicator lamp (5) must light up and a lamp failure message must not be displayed in the multifunction display (21). If complaint present ↓ Rectify problem subject to separate repair order.
		There must be no lamp failure message in the multifunction display (21). If complaint present ↓ Rectify problem subject to separate repair order.
8	Switch on hazard warning system	The left turn signal light indicator lamp (1) and right turn signal light indicator lamp (2) flash in unison in the multifunction display. There must be no lamp failure message in the multifunction display (21). If complaint present ↓ Rectify problem subject to separate repair order.
9	Switch off hazard warning system
	Finishing activity
10	Reset switch positions to input condition
11	Switch electronic ignition lock control unit to position "0"