DC/AC Converter Control Unit, Component Description - GF54.21-P-4127GW
Model 463
as of Model year 2013
with code E47 (Socket, 115 V)
Model 463 (except 463.342) as of production date April 3rd, 2018 ,
Model 463 (except 463.342) up to production date April 2nd, 2018, Model 463.342, shown on Model
463.23
Location
The DC/ac converter control unit is located under the front passenger seat (up to production date April 2nd, 2018 or Model 463.342) or in the load compartment behind the right rear wheel arch (as of production date April 3rd, 2018 (except Model 463.342)).
Task
The DC/AC converter control unit converts the on-board electrical system direct voltage into an alternating voltage of 115 V. The 115V (X58/34) socket can be used to connect small electrical devices that require an alternating voltage, (e.g. video game consoles, mobile phone chargers).
The maximum available electrical continuous load is P = 150 W, for t = 2 s up to P = 300 W is briefly permissible.
The DC/AC converter control unit supplies the microswitch in the socket with voltage. If a consumer is connected to the socket, voltage is switched through to the control input of the DC/AC converter control unit.
| Wiring diagram for control unit DC/AC converter | Model 463 (except 463.342) as of Model year 2019 with code E47 (Socket, 115 V) | PE54.10-P-2103-97ZHA | |
| Model 463 (except 463.342) as of Model year 2013 up to Model year 2019 with code E47 (Socket, 115 V) Model 463.342 as of Model year 2013 with code E47 (Socket, 115 V) | PE54.10-P-2103-97ZGA |