Damping Valve Unit, Basic Function - GF32.32-P-2002A
Model all (CAR)
Overview
This document contains information on:
- General
- Function
General
The damping valve units continuously regulate the damping for each wheel depending on which damping characteristic is specified by the Adaptive Damping System (ADS) control unit. This means that dampening can be adapted to the driving style and road surface condition.
Function
There are two solenoid valves in every damping valve unit with which continuous damping adjustment can be carried out. The damping valve units can be controlled independent of each other for each wheel. The damping valve units are actuated by the Adaptive Damping System (ADS) control unit via a pulse width modulated signal at a frequency of approx. f = 800 Hz. The switching frequency of damping valve units can be up to f = 5 Hz. An open circuit to the individual damping valve units is detected by the Adaptive Damping System (ADS) control unit.
Schematic diagram for strong damping (hard suspension)
During strong dampening, the coil in the damping valve unit is deenergized and flow to the comfort valve is closed by the flat side valve. The entire volume flow must pass through the main piston, thereby generating strong damping.
Schematic diagram for weak damping (soft suspension)
During minor dampening, the coil in the damping valve unit is energized. The armature pulls the flat slide valve upwards and determines, depending on the vehicle speed, the flow area. The flow volume in the monotube gas-filled shock absorber can flow through the comfort valve and the main piston of the monotube gas-filled shock absorber.
The dampening changes depending on the flow area to the comfort valve. When the flow area is completely opened by the flat slide valve, the flow volume goes through the main piston as well as the comfort valve. Monotube gas-filled shock absorbers, as a result, have the lowest dampening.
| Component descriptions | |||
|---|---|---|---|
| Damping valve unit, component description | Model 223 | GF32.32-P-1011A | |
| Model 243 | GF32.32-P-1011B | ||
| Model 206 | GF32.32-P-1011C | ||
| Model 297 | GF32.32-P-1011D | ||
| Model 295 | GF32.32-P-1011E |