(Disposing Of Damper Strut - OS32.25-P-0120-01A)

MODEL 129 

Risk of injury  from drilling gas-filled subassemblies or components (gas filling cannot ignite)

Wear safety glasses and face mask

AS00.00-Z-0006-01A

1. Drill damper strut in the area of the arrow with a 0.5 mm drill.
2. Pump the damper strut empty by pressing the piston rod in several times. The quantity of oil is 250-500 cm³ depending on the version.

   Comply with regulations governing disposal of hydraulic oil

3. Dispose of damper strut (old part).

Courtesy of MERCEDES-BENZ USA