Remove/Install Front Passenger Knee Airbag - AR91.60-P-0100LWO

Model 238 

With Code 460 (Canada version) 

Model 238 

With Code 494 (US version) 

Fig 1: Front Passenger Knee Airbag Components Location - Model 238 With Code 460, 494

Courtesy of MERCEDES-BENZ USA

	Risk of injury  during testing and repair operations related to pyrotechnical components	Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.	AS91.00-Z-0008-01A
Topical note	Information on preventing damage to electronic components due to electrostatic discharge		AH54.00-P-0001-01A
	Information, assessment and legal requirements when working with, handling and storing pyrotechnical components		AH91.00-Z-0000-10A
	Remove/install
1	Move front passenger seat toward rear
2	Disconnect battery ground line		AR54.10-P-0003LWO
3	Unscrew screws/bolts (1) and lower front passenger knee airbag (2) until electrical connector (3) is accessible	Bolt, knee airbag to crossmember	*BA91.60-P-1003-01O
4	Release and disconnect electrical connection (3)	Removal lever	Fig 2
5	Remove front passenger knee airbag (2)
6	Install in the reverse order
	Check
7	Check supplemental restraint system (SRS) with diagnostic unit	When installing new front passenger knee airbag (2).
			AD00.00-P-2000-06LWO

Fig 2: Identifying Removal Lever (203 589 04 33 00)

Courtesy of MERCEDES-BENZ USA