Component Description For Instrument Cluster - GF54.30-P-6000FH
Model 238
Up To Model Year 2021
Shown on model 238.3 as of 01.12.2017 or model 238.4, except code 464 (Digital instrument cluster full display)
The symbols of the indicator and warning messages are described in a separate document.
Model 238
up to model year 2021
with code 464 (Instrument cluster 12.3" diagonal)
The symbols which are present as indicator and warning lamps in the analog display are shown accordingly in the digital full display.
Shown: model 238 with code 464 (Digital instrument cluster full display), CLASSIC view
Shown: model 238 with code 464 (Digital instrument cluster full display), SPORT view
Shown: model 238 with code 464 (Digital instrument cluster full display), PROGRESSIVE view
Location
The instrument cluster is located in the dashboard on the driver-side.
Tasks
The instrument cluster has the following tasks:
- Reading in of sensors and signals
- Evaluation of input factors
- Output of warning tones and indicator tones
- Output of signals
Reading in of sensors and signals
The instrument cluster reads in information and data via the following connections:
- User interface CAN
- High-speed video link (HSVL)
User interface CAN
The signals are read in by the instrument cluster via user interface CAN (CAN HMI).
High-speed video link
The instrument cluster is connected to the head unit (A26/17) via a HSVL line. Via this interface, the instrument cluster receives map data from the head unit.
Evaluation of input factors
The input factors that have been read in are evaluated by the integrated microprocessor and the relevant components are then actuated.
Output of warning tones and indicator tones
The instrument cluster actuates the instrument cluster speaker (H4/61) in the driver footwell to output warning and indicator tones which are requested by the systems installed in the vehicle.
Output of signals
The instrument cluster sends information and data over the following connections:
- User interface CAN
- High speed video link (with code 463 (Head-up Display))
User interface CAN
The instrument cluster transmits information and data via user interface CAN to various control units.
High speed video link (with code 463 (Head-up Display))
The instrument cluster is connected to the head-up display (A40/12) via a HSVL line. Via this interface, the instrument cluster sends signals for the displays and illustrations shown on the head-up display.
Variants
- Entry CLASSIC (2-tube, analog) (except code 464 (Digital instrument cluster full display))
- High Traditional (2-tube, digital (virtual)) (with code 464 (Digital instrument cluster full display))
On vehicles with code 464 (Digital instrument cluster full display), the right and center display areas of the instrument cluster can be programmed freely.
The following contents can be selected:
- SPORT, CLASSIC (right side of display area)
- Tachometer
- Navigation instructions
- ECO display
- Consumption data
- Apps
- PROGRESSIVE (right side of display area)
- Date
- Navigation instructions
- ECO display
- Consumption data
- Apps
- PROGRESSIVE (center of display area)
- Assist graphic
| Overview of symbols of indicator/warning messages | GF54.30-P-2001-04AA | ||
| Wiring diagram for instrument cluster (IC) control unit | PE54.30-P-2101-97DCA |