Bleed Brake System - AR42.10-P-0010LWE

Model 213 

Model 238 

Courtesy of MERCEDES-BENZ USA

Shown on model 213 

	Risk of poisoning  from swallowing brake fluid. Risk of injury  from skin and eye contact with brake fluid	Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.	AS42.50-Z-0001-01A
Topical note	Notes on handling, transport and storage of composite brake disks		AH42.10-P-9406-12LF
Topical note	Notes on handling, transport and storage of ceramic brake disks		AH42.10-P-9406-13A
Topical note	Notes on repairs to brake system		AH42.00-P-0003-01A
Topical note	Brake fluid notes		AH42.50-P-0001-01A
	Remove
1	Remove cover (5) above brake fluid reservoir (6)
	Clean
2	Clean area around cap of brake fluid reservoir (6)	Assembly cleaner	*BR00.45-Z-1028-04A
3	Unscrew cap of brake fluid reservoir (6)
	Bleeding
4	Fill brake fluid reservoir (6) with new brake fluid up to maximum mark
	Brake fluids (DOT 4 plus)		BB00.40-P-0331-00A
	General brake fluid		BB00.40-P-0330-01A
5	Remove front wheels		AR40.10-P-1102A
6	Connect filling unit to brake fluid reservoir (6)
	000 588 01 82 00 Filling unit		WS25.00-P-0016B
	Brake fluids (DOT 4 plus)		BB00.40-P-0331-00A
	General brake fluid	Pay attention to manufacturer's operating instructions.	BB00.40-P-0330-01A
7	Switch on filling unit
8	Raise vehicle		AR00.60-P-1002LWG
9	Carrying out bleeding operation		AR42.10-P-0010-02LWE
	000 588 01 82 00 Filling unit		WS25.00-P-0016B
		Bleed screw to brake caliper	*BA42.10-P-1002-12W
		Bleed screw at brake caliper	*BA42.10-P-1003-10X
10	Install front wheels		AR40.10-P-1102A
	Check
11	Lower vehicle		AR00.60-P-1002LWG
12	Switch off filling unit and disconnect from brake fluid reservoir (6)
13	Check brake system for leaks		AR42.10-P-0100-01V
14	Correct fluid level in brake fluid reservoir (6)
			AP42.10-P-4210B
	Install
15	Seal brake fluid reservoir (6) with cap
16	Install cover over brake fluid reservoir (6)