Remove/Install Seatbelt Extender - AR91.45-P-1000LWO

Model 238.3 

Courtesy of MERCEDES-BENZ USA

Shown on model 238.3 With Code 810 (Sound system), left side of vehicle 

	Remove/install
1	Remove left or right upper trim in rear		AR68.30-P-4783LWO
2	Remove bolts (2)	Model 238.3 with code 810 (Sound system) Model 238.3 with code 811 (Advanced sound system)
3	Loosen nut (3) and swivel speaker (4) with bracket to side	Model 238.3 with code 810 (Sound system) Model 238.3 with code 811 (Advanced sound system)
4	Expose electrical wiring harness (5) (arrows)	Clip remover	Fig 1
5	Disconnect electrical connection (6)
6	Loosen nut (7)
7	Remove screw/bolt (8) and take off seat belt extender (1)	: Ensure that the belt extender (1) is seated correctly.
8	Install in the reverse order

Fig 1: Identifying Clip Remover (452 589 01 63 00)

Courtesy of MERCEDES-BENZ USA