238 588 01 23 00 Data Sheet - WS60.00-P-0255K

Model 238.3

Use in FG 60/61/62/63/64/65/ Set B/K

Purpose:

Vehicle specific assembly note for setting up straightening bench.

NOTE: Substructure and side wall only in combination with the approved straightening system of the manufacturer named below.

Please observe manufacturer-specific set-up plan.

Technical Note:

In combination with 000 588 03 23 00 bodyshell straightening system

The analysis and attachment of all aluminum structural parts of the bodyshell is performed exclusively using the repair method described in WIS.

Reference information:

Recommended workshop equipment and information about the manufacturers can be found in the WS document (see below).

Courtesy of MERCEDES-BENZ USA

Manufacturer

CAR BENCH INTERNATIONAL S.p.A.

Via Dorsale 22

54100 Massa

Italy

http://www.carbench.it