Remove/Install Engine Cover - AR01.10-P-2405MSA
Engine 256 In Model 213, 238, 257, 290
| Risk of injury caused by scraping or cutting body parts on sharp vehicle parts | Always wear protective gloves when working on or near sharp and non-deburred vehicle parts. Deburr repair panels. |
AS00.00-Z-0017-01A | |
| Remove/install | |||
| 1 | Detach the cold air guide (2) on the cold air intake manifold | ||
| 2 | Detach ball head (3) from elastomer bearing at engine | Lubricant, rubber assembly 1 L |
*BR00.45-Z-1010-06A |
| 3 | Detach the elastomer bearings (4) and remove the engine cover (1) with the cold air guide (2) by moving it upwards | Lubricant, rubber assembly 1 L |
*BR00.45-Z-1010-06A |
| 4 | Check the elastomer bearings (4) for damage | If damage occurs to the elastomer bearing (4) ↓ Replace elastomer bearing (4). |
|
| 5 | Install in the reverse order |
REPAIR MATERIALS
| Number | Designation | Order number |
|---|---|---|
| BR00.45-Z-1010-06A | Lubricant, rubber assembly 1 L | A 000 989 03 67 |