Blind Spot Assist Wiring Diagram - PE54.71-P-2100-97DEA
Model 238 as of model year 2021 with code 234 (Blind Spot Assist) Radar sensors B92/7 and B92/10
| Code: | Designation: | Position: |
|---|---|---|
| A0 | Use of wiring diagrams | 40L |
| B92/11 | Left outer rear bumper integrated radar sensor | 14A |
| B92/11 | Left outer rear bumper integrated radar sensor | 20A |
| B92/11 | Left outer rear bumper integrated radar sensor | 34J |
| B92/11 | Left outer rear bumper integrated radar sensor | 33A |
| B92/6 | Right outer rear bumper integrated radar sensor | 6A |
| B92/6 | Right outer rear bumper integrated radar sensor | 20A |
| B92/6 | Right outer rear bumper integrated radar sensor | 34G |
| B92/6 | Right outer rear bumper integrated radar sensor | 33A |
| CAN PER | Peripherals CAN | 8K |
| N10/8 | Rear SAM control unit | 3L |
| W6 | Left wheel arch trunk ground point | 6L |
| X26/40x4 | Rear bumper electrical connector 4 | 3H |
| X30/27 | Peripherals CAN (CAN PER) potential distributor electrical connector | 8L |
| Z36/17z1 | Rear sensor CAN (low) connector sleeve | 16F |
| Z36/19z1 | Rear sensor CAN (high) connector sleeve | 15F |
| Z36/35z1 | Rear bumper circuit 15 connector sleeve | 3E |
| Z36/36z1 | Rear bumper circuit 31 connector sleeve | 6E |
| Z6/30z10 | Circuit 31 connector sleeve | 6J |