Remove/Install Partition In The Engine Compartment, Left - AR94.20-P-0001-01MSA
Model 213, 238, 257, 290
FROND END WITH FRONT REINFORCEMENT
| Number | Designation | Model 213 | Model 238 | |
|---|---|---|---|---|
| BA62.30-P-1008-02K | Screw, left partition wall to center partition/left front longitudinal member | Nm | 4 | 4 |
FROND END WITH FRONT REINFORCEMENT
| Number | Designation | Model 257 | Model 290 | |
|---|---|---|---|---|
| BA62.30-P-1008-02K | Screw, left partition wall to center partition/left front longitudinal member | Nm | 4 | 4 |
FROND END WITH FRONT REINFORCEMENT
| Number | Designation | Model 213 | Model 238 | |
|---|---|---|---|---|
| BA62.30-P-1009-02K | Nut-and-washer assembly, left partition to center partition/left fire crossmember wall | Nm | 6 | 6 |
FROND END WITH FRONT REINFORCEMENT
| Number | Designation | Model 257 | Model 290 | |
|---|---|---|---|---|
| BA62.30-P-1009-02K | Nut-and-washer assembly, left partition to center partition/left firewall crossmember | Nm | 6 | 6 |
FROND END WITH FRONT REINFORCEMENT
| Number | Designation | Model 213 | Model 238 | |
|---|---|---|---|---|
| BA62.30-P-1010-02K | Nut, left partition to left front longitudinal member | Nm | 4 | 4 |
FROND END WITH FRONT REINFORCEMENT
| Number | Designation | Model 257 | Model 290 | |
|---|---|---|---|---|
| BA62.30-P-1010-02K | Nut, left partition to left front longitudinal member | Nm | 4 | 4 |
- Detach seal (1) from partition (5).
- Remove air duct seal (2).
- Unclip retaining clip (3) with electric line at partition (5).
- Unclip purge line (4) from retaining clips.
- Slacken nuts (6).
- Remove screws (7).
- Release nut (8).
- Remove partition (5) upward.