Fabricate Drilling Template For CD Drive - AZ82.64-P-0002-07LPR

Model 238.4## 2# 

1. Print out drilling template (S).
2. Determine dimensions (A, B) of print-out.
3. Determine scaling factor.

   Divide dimension specified (A) by dimension determined (A).

   Divide dimension specified (B) by dimension determined (B).

4. Copy printed-out drilling template (S) to original size using determined scaling factor.
5. Cut out drilling template (S).

   Drilling template (S) 

   Courtesy of MERCEDES-BENZ USA

   Courtesy of MERCEDES-BENZ USA

   Drilling template (SL) 

6. Print out drilling template (SL).
7. Determine dimensions (C, D) of printout.
8. Determine scaling factor.

   Divide specified dimension (C) by measured dimension (C).

   Divide specified dimension (D) by measured dimension (D).

9. Copy printed-out drilling template (SL) to original size using determined scaling factor.
10. Cut out drilling template (SL).