(Specified Anti-Corrosion Protection/Antifreeze (CV) - Overview - BB00.40-P-0320-02A)
Model all (BUS, Heavy transporter, TRUCK, UNIMOG)
| Coolant Specification sheets | BB00.40-P-0310-01A |
| Prescribed Specification sheet for service fill anti-corrosion agents/antifreeze Commercial vehicle engines - Mercedes-Benz | |||||
|---|---|---|---|---|---|
| MB Specification sheets for Operating Fluids, Specification sheet | 312 | 325, 326 | |||
| .0 | .0 | .3 | .5 | ||
| Major assembly model series without secondary water retarder (SWR) | OM 300 | • | • | • | • |
| OM 400 | • | • | • | • | |
| OM 904 - 926 | • | • | • | • | |
| OM 934, 936 | - | - | - | • | |
| OM 457, 460 | • | • | • | • | |
| OM 500 | • | • | • | • | |
| OM 470 - 473 | - | - | - | • | |
| Major assembly model series with secondary water retarder (SWR) | - | - | - | • | |
| Prescribed Specification sheet for service fill anti-corrosion agents/antifreeze Car engines in commercial vehicles - Minibus | |
|---|---|
| MB Specification sheets for Operating Fluids, Specification sheet | 325, 326 |
| .6 | |
| OM 654 | • |
NOTE:
As a general rule, the approved anti-corrosion agents/antifreeze (MB Specification sheet) can be found in the respective operator's manual for the vehicle.
This table contains only the anti-corrosion agents/antifreeze for engines that were in production in the period of the last 15 years. Information on unlisted or older engine models can be found in the vehicle's operator's manual or the maintenance procedures.
Ensure that concentrated anti-corrosion agents/antifreeze (MB Specification sheets 325.x) are mixed with suitable water as per the specification from MB Specification sheet 310.1 before being used in the cooling circuit. Ready-mixes (MB Specification sheets 326.x) may not be mixed with water.
• Approval
- May not be used.