Remove/Install Connecting Flange Of Charge Air Distributor On Left Cylinder Head - AR09.41-P-0009MND

Engine 276.8 in model 213, 238 

Fig 1: Connecting Flange Of Charge Air Distributor On Left Cylinder Head Components Location - Engine 276.8 In Model 213

Courtesy of MERCEDES-BENZ USA

	Remove
1	Remove charge air distributor		AR09.41-P-8683MND
2	Remove screw/bolts (9) of left connecting flange (11) from outwards inwards
3	Remove left connecting flange (11) upwards
4	Protect intake ports of the left and right cylinder head with clean rags against soiling and foreign objects
5	Remove sealant residues on left connecting flange (11) and on left cylinder head	The sealing surfaces on the left connecting flange (11) and on the left cylinder head must not have any foreign objects, scratches or grooves. Non-observance leads to leakage between the left connecting flange (11) and left cylinder head. Do not use any sharp-edged tools or abrasive paper. The sealing surfaces can get damaged otherwise. Loctite 7200	*BR00.45-Z-1038-04A
	Install
6	Replace seals of left connecting flange (11) on left cylinder head
7	Remove the rags from the intake ports of the left and right cylinder head
8	Position left connecting flange (11) on left cylinder head
9	Remove screw/bolts (9) of left connecting flange (11) from inside outwards	Screw/bolt, intermediate flange to cylinder head	*BA09.41-P-1004-01R
10	Install charge air distributor		AR09.41-P-8683MND

CHARGE AIR PIPE/CHARGE AIR COOLING

Number	Designation		Engine 276.8
BA09.41-P-1004-01R	Screw/bolt, intermediate flange to cylinder head	Nm	9

REPAIR MATERIALS

Number	Designation	Order number
BR00.45-Z-1038-04A	Loctite 7200	Henkel AG & Co. KGaA