Transfer Plug Housing For Reversing Camera Electrical Wiring Harness - AN82.85-P-0009-07LWE

Model 213, 238 

1. Unlock and remove the secondary fuse (1.1) at the connector socket (1).
2. Remove the electrical line for the reversing camera (3) from the connector (1).

   The connector (1) is no longer required.

   Courtesy of MERCEDES-BENZ USA

3. Release and remove secondary fuse (2.3) at connector socket (2) as shown.
4. Install previously removed electrical lines for the reversing camera (3) in the chamber (2.1) of the connector (2).
5. Lock secondary fuse (2.3) at connector socket (2).

   The connector (2) is connected to the head unit at a later point.

   Courtesy of MERCEDES-BENZ USA