Wiper Arm Adjustment - AR82.30-P-6100-01LW

Model 205 

Model 206, 297 

Model 213 

Model 238 

Model 253, 293 

	Risk Of Injury  by clamping or squeezing, in extreme cases by shearing off limbs when interfering with the windshield wiper mechanism	When working on the windshield wiper mechanism, always switch off the ignition and keep the transmitter key out of the transmitter range (at least 2 m).	AS82.30-Z-0001-01A
	Notes on adjusting the wiper arms		AH82.30-P-0001-01A

Number	Designation			Model 205	Model 206
BE82.30-P-1003-01M	Wiper arm angle of incidence on driver's side in parking position	Left hand drive	∠°	+3...+ 7,	+3....+7,
		Right hand drive	∠°	-3...-7,	-3....-7,

Number	Designation			Model 213	Model 238
BE82.30-P-1003-01M	Wiper arm angle of incidence on driver's side in parking position	Left hand drive	∠°	+3...+ 7,	+2...+6,
		Right hand drive	∠°	-3...-7,	-2...-6,

Number	Designation			Model 253	Model 293
BE82.30-P-1003-01M	Wiper arm angle of incidence on driver's side in parking position	Left hand drive	∠°	+3...+7,	+3...+7,
		Right hand drive	∠°	-3...-7,	-3...-7,

Number	Designation			Model 297
BE82.30-P-1003-01M	Wiper arm angle of incidence on driver's side in parking position	Left hand drive	∠°	+3...+7,
		Right hand drive	∠°	-3...-7,

Number	Designation			Model 205	Model 206
BE82.30-P-1004-01M	Wiper arm angle of incidence on passenger side in parking position	Left hand drive	∠°	+3...+7,	+3...+7,
		Right hand drive	∠°	-3...-7,	-3...-7,

Number	Designation			Model 213	Model 238
BE82.30-P-1004-01M	Wiper arm angle of incidence on passenger side in parking position	Left hand drive	∠°	+3...+7,	+1...+5,
		Right hand drive	∠°	-3...-7,	-1...-5,

Number	Designation			Model 253	Model 293
BE82.30-P-1004-01M	Wiper arm angle of incidence on passenger side in parking position	Left hand drive	∠°	+3...+7,	+3...+7,
		Right hand drive	∠°	-3...-7,	-3...-7,

Number	Designation			Model 297
BE82.30-P-1004-01M	Wiper arm angle of incidence on passenger side in parking position	Left hand drive	∠°	+3...+7,
		Right hand drive	∠°	-3...-7,

Use the following special tools: Angle encoder (A) off Set Of Adjustment Tool (211 589 02 21 00)

Adjusting lever (Z4) off Set of adjustment tools (211 589 02 21 00)

Model 205, 206, 213, 253, 293

Model 238

except Code 874 (MAGIC VISION CONTROL including heated windshield washer system.) Adapter (E) (205 589 00 21 00)

Model 238

with Code 874 (MAGIC VISION CONTROL including heated windshield washer system.) Adapter (E) (231 589 00 21 00)

Model 206 Adapter (E) (206 589 00 21 00)

Courtesy of MERCEDES-BENZ USA

1. Angle measuring device (A) with the corresponding Attach adapter (E) to the wiper arm to be adjusted.
2. Die Place the adjusting lever (Z4) as far apart as possible on the wiper arm to be adjusted. The Lock the setting lever (Z4) in the required direction until the correct setting value is shown on the scale of the Angle measuring device (A) has been reached.

   The wiper arm is interlocked via the Adjustment lever (Z4), which is close to the Angle measuring device (A) is positioned. The second Adjustment lever (Z4) serves as a counter holder.

3. The Remove the adjusting lever (Z4) from the wiper arm.
4. The angle of incidence of the adjusted wiper arm on the scale of the Read off the angle measuring device (A) and compare it with the setting value.

   If there is a discrepancy,

   ↓

   correct the angle of incidence.

5. Angle measuring device (A) with the corresponding Remove adapter (E) from the adjusted wiper arm.

   Courtesy of MERCEDES-BENZ USA

6. Repeat the setting process on the wiper arm that has not yet been set.

   If necessary.

   Shown on the wiper arm on the driver's side in the parking position