Remove/Install Liftgate Wiper Arm - AR82.30-P-6911LW

Model 205.2 

Model 213.2 

Model 253.1/9, 293 

Fig 1: Liftgate Wiper Arm Components Location - Model 213.2

Courtesy of MERCEDES-BENZ USA

	Injury hazard from pinching and crushing, in extreme cases extremities can even be cut off when caught in windshield wiper mechanism.	When working on the windshield wiper mechanism, always switch off the ignition and store transmitter key outside of transmission range (at least 2 m).	AS82.30-Z-0001-01A
	Notes on HANDS-FREE ACCESS		AH80.61-P-0001-01A
	Remove
1	Move rear windshield wiper system to park position.
2	Switch off ignition and store transmitter key outside of transmission range (min. 2 m).
3	Mark position of wiper arm (1) using strip of adhesive tape on rear window.
4	Fold up cover (2).
5	Loosen nut (3) by two turns.
6	Loosen wiper arm (1) from the wiper motor with a puller.	Puller	Fig 2
7	Unscrew nut (3) and remove wiper arm (1).
	Install
8	Place wiper arm (1) onto shaft of wiper motor and align to adhesive strip on rear window.
9	Fasten nut (3) of wiper arm (1) securely.	Nut, wiper arm to liftgate wiper motor	*BA82.30-P-1005-01M
10	Remove tape strip.
11	Fold down cover (2).

WINDSHIELD WIPER

Number	Designation			Model 205	Model 213
BA82.30-P-1005-01M	Nut, wiper arm to liftgate wiper motor	Plastic	Nm	13	-
		Metal	Nm	20	20

WINDSHIELD WIPER

Number	Designation			Model 253	Model 293
BA82.30-P-1005-01M	Nut, wiper arm to liftgate wiper motor	Plastic	Nm	-	-
		Metal	Nm	20	20

Fig 2: Identifying Puller (001 589 38 33 00)

Courtesy of MERCEDES-BENZ USA