Remove/Install Head Unit Hard Drive - AR82.85-P-1102A
Model 118, 167, 177, 213, 238, 243, 247, 253, 257, 290, 293
with code 548 (Connect 20 MID (NTG6))
Model 118, 167, 177, 213, 238, 243, 247, 253, 257, 290, 293
with code 549 (Connect 20 HIGH (NTG6))
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove | |||
| 1 | Remove head unit (A26/17). | Model 253 (except 253.992/993) as of model year 2020 with code 548 (Connect 20 MID (NTG6)) Model 253 (except 253.992/993) as of model year 2020 with code 549 (Connect 20 HIGH (NTG6)) |
AR82.85-P-1101LWX |
| Model 253.992/993 with code 548 (Connect 20 MID (NTG6)) Model 253.992/993 with code 549 (Connect 20 HIGH (NTG6)) |
AR82.85-P-1101RFW | ||
| Model 167 with code 548 (Connect 20 MID (NTG6)) Model 167 with code 549 (Connect 20 HIGH (NTG6)) |
AR82.85-P-1101ME | ||
| Model 118, 177, 243, 247 with code 548 (Connect 20 MID (NTG6)) Model 118, 177, 243, 247 with code 549 (Connect 20 HIGH (NTG6)) |
AR82.85-P-1101MFA | ||
| Model 293 with code 548 (Connect 20 MID (NTG6)) Model 293 with code 549 (Connect 20 HIGH (NTG6)) |
AR82.85-P-1101EQ | ||
| Model 213, 238 with code 548 (Connect 20 MID (NTG6)) Model 213, 238 with code 549 (Connect 20 HIGH (NTG6)) |
AR82.85-P-1101LWE | ||
| Model 257, 290 with code 548 (Connect 20 MID (NTG6)) Model 257, 290 with code 549 (Connect 20 HIGH (NTG6)) |
AR82.85-P-1101FR | ||
| 2 | Place head unit (A26/17) onto ESD kit and prepare as per instructions on potential equalization. | Fig 1 | |
| 3 | Remove screw (2) of head unit hard drive (1). | ||
| 4 | Slide head unit hard drive (1) in direction of arrow (a) until the position arrows (3, 4) face each other. | ||
| 5 | Carefully lift and remove head unit hard drive (1). | ||
| Install | |||
| 6 | Carefully position new head unit hard drive (1) on head unit (A26/17). | Position head unit hard drive (1) so that the position arrows (3, 4) face each other. Otherwise, the head unit hard drive (1) may be damaged during installation. |
|
| 7 | Slide head unit hard drive (1) in direction of arrow (b) until the screw (2) can be positioned. | Make sure that the head unit hard drive (1) is seated correctly. Otherwise, when sliding in the direction of the arrow (b), the connection contacts may be damaged. |
|
| 8 | Screw in bolt (2). | ||
| 9 | Remove ESD kit. | ||
| 10 | Install head unit (A26/17). | Model 253 (except 253.992/993) as of model year 2020 with code 548 (Connect 20 MID (NTG6)) Model 253 (except 253.992/993) as of model year 2020 with code 549 (Connect 20 HIGH (NTG6)) |
AR82.85-P-1101LWX |
| Model 253.992/993 with code 548 (Connect 20 MID (NTG6)) Model 253.992/993 with code 549 (Connect 20 HIGH (NTG6)) |
AR82.85-P-1101RFW | ||
| Model 167 with code 548 (Connect 20 MID (NTG6)) Model 167 with code 549 (Connect 20 HIGH (NTG6)) |
AR82.85-P-1101ME | ||
| Model 118, 177, 243, 247 with code 548 (Connect 20 MID (NTG6)) Model 118, 177, 243, 247 with code 549 (Connect 20 HIGH (NTG6)) |
AR82.85-P-1101MFA | ||
| Model 293 with code 548 (Connect 20 MID (NTG6)) Model 293 with code 549 (Connect 20 HIGH (NTG6)) |
AR82.85-P-1101EQ | ||
| Model 213, 238 with code 548 (Connect 20 MID (NTG6)) Model 213, 238 with code 549 (Connect 20 HIGH (NTG6)) |
AR82.85-P-1101LWE | ||
| Model 257, 290 with code 548 (Connect 20 MID (NTG6)) Model 257, 290 with code 549 (Connect 20 HIGH (NTG6)) |
AR82.85-P-1101FR | ||
| 11 | Perform commissioning of head unit hard drive (1). | ||
| Model 213, 253 with code 548 (Connect 20 MID (NTG6)) Model 213, 253 with code 549 (Connect 20 HIGH (NTG6)) |
AD00.00-P-2000-04B | ||
| Model 118, 177, 243, 247 with code 548 (Connect 20 MID (NTG6)) Model 118, 177, 243, 247 with code 549 (Connect 20 HIGH (NTG6)) |
AD00.00-P-2000-06MFA | ||
| Model 257, 290, 293 with code 548 (Connect 20 MID (NTG6)) Model 257, 290, 293 with code 549 (Connect 20 HIGH (NTG6)) |
AD00.00-P-2000-06FR | ||
| Model 167 with code 548 (Connect 20 MID (NTG6)) Model 167 with code 549 (Connect 20 HIGH (NTG6)) |
AD00.00-P-2000-06ME | ||
| Model 238 with code 548 (Connect 20 MID (NTG6)) Model 238 with code 549 (Connect 20 HIGH (NTG6)) |
AD00.00-P-2000-06LWO | ||
| 12 | Update map data for navigation system. | ||
| Model 167, 213, 238, 257, 290 with code 548 (Connect 20 MID (NTG6)) Model 167, 213, 238, 257, 290 with code 549 (Connect 20 HIGH (NTG6)) |
AP82.85-P-8251A | ||
| Model 253 with code 548 (Connect 20 MID (NTG6)) Model 253 with code 549 (Connect 20 HIGH (NTG6)) |
AP82.85-P-8251D | ||
| Model 118, 177, 247 with code 548 (Connect 20 MID (NTG6)) Model 118, 177, 247 with code 549 (Connect 20 HIGH (NTG6)) |
AP82.85-P-8251E | ||
| Model 293 with code 548 (Connect 20 MID (NTG6)) Model 293 with code 549 (Connect 20 HIGH (NTG6)) |
AP82.85-P-8251F | ||
| Model 243 with code 548 (Connect 20 MID (NTG6)) Model 243 with code 549 (Connect 20 HIGH (NTG6)) |
AP82.85-P-8251H |