Remove/Install Additional Brake Lamp - AR82.10-P-5376LWT
Model 213.2
| Risk of injury caused by fingers being jammed or pinched when removing, installing or aligning hoods, doors, trunk lid/rear-end door or sliding roof. | No parts of the body or limbs should be within the operating area when the components are moving. | AS00.00-Z-0011-01A | |
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Notes on sensor system for trunk lid opening/closing | Model 213.2 with code P17 (KEYLESS-GO package) | AH80.61-P-0001-01A | |
| Remove/install | |||
| 1 | Remove upper liftgate paneling | AR72.20-P-6631LWS | |
| 2 | Remove water hose (2) from spray nozzle | ||
| 3 | Disconnect electrical connector (3) | ||
| 4 | Disconnect electrical connection (4) | ||
| 5 | Unscrew nuts (5) and remove the roof spoiler (1) | ||
| 6 | Remove bolts (6) | ||
| 7 | Detach electrical plug (7) from the roof spoiler (1) | ||
| 8 | Push catch (8) on the roof spoiler (1) downwards using a suitable tool | ||
| 9 | Remove center brake lamp (E21) from the roof spoiler (1) | Carefully remove center brake lamp (E21). Otherwise, damage can occur to the guides. |
|
| 10 | Install in the reverse order | ||
| Check | |||
| 11 | Perform function check of center brake lamp (E21) |